Winnebago Revel Kitchen Storage: How to Put Your Galley Wall to Work Without Drilling
Published Oct 23, 2026
How do you add Winnebago Revel kitchen storage without drilling into the walls?
The short answer: the cleanest way to add Winnebago Revel kitchen storage without drilling is to mount a powder-coated steel magnetic board on the vertical galley wall beside the sink using pre-cut, heat-resistant mounting tape. Because camper van walls are laminate rather than steel, magnetic spice shelves, paper towel holders, and hooks cannot stick to the wall on their own. A tape-mounted steel board gives you a solid magnetic wall in 5 to 10 minutes, with zero screw holes in your cabinetry.
Why the Winnebago Revel galley runs out of counter space
Anyone who cooks inside a Winnebago Revel knows the galley tradeoff. The compact counter holds a square stainless steel sink and induction prep zone, leaving almost no flat surface for the items you reach for ten times a day: dish soap, a scrub brush, paper towels, olive oil, salt, pepper, and coffee mugs.
Leave those items around the sink rim and they slide into the basin on the first forest road. Pack every bottle and paper towel roll inside an overhead cabinet before every drive and making lunch at a trailhead turns into a chore. Meanwhile, the vertical wall right beside the Revel sink sits empty. Putting that vertical wall to work clears the counter for good.
Comparing Winnebago Revel kitchen storage options
Revel owners looking to use the galley wall usually compare four approaches: hook-and-loop adhesive strips, bolted aluminum MOLLE panels, stick-on plastic caddies, and a tape-mounted steel magnetic board.
| Storage approach | Drilling required? | Can you move shelves later? | Holds magnetic accessories? | Common road tradeoff |
|---|---|---|---|---|
| Hook-and-loop adhesive tabs | No | No | No | Tabs on individual bottles fatigue in cabin heat and let items fall |
| Bolted aluminum MOLLE panel | Usually yes | Only by unweaving straps | No (aluminum is non-magnetic) | Permanent screw holes; built for tactical pouches rather than spice tins |
| Suction or stick-on caddies | No | No | No | Suction fails on textured laminate; fixed bins rattle |
| Tape-mounted steel magnetic board | No (heat-resistant tape) | Yes, in seconds | Yes (shelves, paper towel holders, hooks) | Needs a flat wall zone; magnetic accessories sold separately |
Why hook-and-loop tabs fail on washboard roads
Many owners start by sticking hook-and-loop strips directly onto soap bottles, thermometers, or small bins. A narrow strip on the back of a full pump bottle carries heavy peel stress every time the van hits a pothole or sits in a warm parking lot.
Revel owner Jenny Penny tried hook-and-loop tabs first before switching to our Revel boards. As she shared on our gallery: "We have a Revel so are using the new Revel boards that Acorn has and they are great! Previously we'd been using [hook-and-loop] tabs and they would periodically give out and everything would fall. Nothing falls now! And they look so sleek and finished."
Bolted MOLLE panels vs. a magnetic steel board
Aluminum MOLLE panels work well in a rear garage for recovery gear and pouches, but in a kitchen galley they have two real limits. First, aluminum is not magnetic, so you cannot snap a magnetic spice tin, knife strip, or paper towel holder onto it. Second, rearranging a MOLLE setup requires unthreading bolts or straps, whereas a magnetic shelf lifts off and moves in two seconds when you buy a taller bottle.
How the Acorn Stash Revel lineup fits the pantry model
We build powder-coated steel magnetic boards in California sized for the Winnebago Revel (pantry model) in a matte Black finish:
- Kitchen Magnetic Board (Revel) ($175): Mounts to the vertical kitchen wall beside the sink in the Revel pantry model. Powder-coated steel handles kitchen moisture and holds magnetic shelves, utensils, spice jars, and paper towels.
- Entrance Magnetic Board (Revel) ($85): A slim board for the Revel entryway that catches keys, sunglasses, and daily gear. It mounts in two different spots depending on your Revel's trim configuration (with trim or without trim).
- Revel Duo (2 boards) ($235): Bundles both the Kitchen and Entrance boards, saving $25 and qualifying for free continental US shipping (orders over $200 ship free).
How to install a magnetic board in 5 to 10 minutes
Each board ships with pre-cut, double-sided, heat-resistant mounting tape applied to the back, so you never drill into your cabinetry:
- Test-fit the position. Hold the board beside the Revel sink and check clearance under the upper cabinet and around the faucet.
- Clean the wall. Wipe the surface so it is free of cooking oil or dust, and let it dry.
- Peel the tape backing. Expose the pre-cut heat-resistant mounting tape.
- Press and hold for 30 seconds. Press the board firmly against the wall for 30 seconds.
- Add your magnetic accessories. Snap on magnetic shelves, hooks, and holders. Our support page links the third-party magnetic paper towel holder, cup holders, and basket sets we use in our own van.
Driving a Jayco Terrain 19Y or Entegra Launch 19Y?
If you drive an Entegra Launch 19Y or Jayco Terrain 19Y, both vans share the exact same 19Y floorplan and wall layout. We build a dedicated 19Y lineup in Slate and Pebble powder-coated steel, starting with the 18 in x 24 in Kitchen Magnetic Board ($175, which Jayco Terrain owner Frederick T says "gave a graceful solution to the problem of the flying soap pump!") and The Full Stash Set ($325 for all three interior boards, saving $40) on our shop page. Every board ships from California in 3 to 5 business days with a 30-day return policy on undamaged boards.
FAQ
How do you add Winnebago Revel kitchen storage without drilling into the walls?
Mount a powder-coated steel magnetic board to the galley wall beside the sink using pre-cut, double-sided, heat-resistant mounting tape. Once the steel board is on the wall, magnetic spice racks, paper towel holders, hooks, and utensil cups snap directly onto it without drilling a single screw hole.
Why don't standard magnetic spice racks stick to camper van walls?
Standard magnetic kitchen racks and hooks need a steel surface. Camper van galley walls in the Winnebago Revel, Entegra Launch, and Jayco Terrain are finished in composite laminate, wood, or aluminum, so magnets have nothing to grip until you add a steel backing board.
Which Winnebago Revel floorplan do Acorn Stash magnetic boards fit?
Acorn Stash makes the Kitchen Magnetic Board ($175), Entrance Magnetic Board ($85), and Revel Duo bundle ($235) specifically for the Winnebago Revel with the pantry floorplan. For the Entegra Launch 19Y and Jayco Terrain 19Y, we make a dedicated 19Y board lineup.
How long does it take to install an Acorn Stash magnetic board?
Installation takes 5 to 10 minutes per board. Each board ships with pre-cut, double-sided, heat-resistant mounting tape applied. You clean the wall surface, peel the protective backing, press the board firmly into place, and hold it for 30 seconds.